etrailer | Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier Review

Click for more info and reviews of this Viking Solutions Hunting and Fishing:



Check out some similar Hunting and Fishing options:







Don’t forget to subscribe!





Full transcript:

Colin: Hey everyone, it's Colin here at e-trailer and today I'm going to show you guys this Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier. This is a very versatile design. Basically you're going to be able to use it in two different ways. Right now we have it in the cargo carrier configuration. This is going to have a 300 pound weight capacity. So, you can get your heavier coolers and duffle bags loaded up for your trip.But it's also got a second function.



It does include a set of wheels you can attach to the bottom of the carrier and then you just pull it off of the shank and instead of having to carry these heavy and full coolers over to your destination, could be 500 feet away, you just grab the handle on the front and you can pull it wherever you're going.Now right away I want to show you guys the things that are going to set this cargo carrier apart from a lot of its competitors and it's the fact that we can attach this set of wheels and use it as a cart or a hauler. So, what we're going to do is remove this pin right here, put it in the outside hole, and then we can pull the cargo carrier off of the shank to where it's on this round tube, and from there we can tilt it to the right or to the left. We'll go to the right right now and our straps are keeping our cargo secured.And now we'll just take our wheels and you can see this slot on the front part of each leg. We'll take that and put it over the set of pins that are already installed. Now we'll take the other set of pins, lift up on our leg, and install them.Now we'll remove the pin all the way and just set it to the side.



From here, we can just tilt our carrier back and then pull it off so that the wheels are supporting it. And now just like that, we've transformed it into a cart to wheel it off to where we need to go.And thanks to the tubular design on our shank, it makes it very easy to slide it off all the way. You don't have to worry about lifting it up by herself. It just slides right off. And right away you can see that this is a pretty long pin and clip and when we first got the rack, it did seem like it would fit that way, but the 10 is not long enough to be able to get under the stand right here and still hook on to the pin.So, we went ahead and just used the same straps we we're using to secure our duffle bag, it was very simple, just to get it strapped down to make sure it doesn't fall down while we're traveling.



Whenever you're done you can either set it down on its side like so, or you can use the included stand to prop it up so that it remains straight. Now, right now you can see we have our stand strapped down to make sure it doesn't fall down at all while we're traveling. So we'll just go ahead and undo the strap.Now from here we can just pull down our stand and set it upright. The stand actually attaches to our handle right here that we use to pull the cart around, just using a couple of washers and a bolt. It's got a really secure fit.



If you find that you're having trouble pulling down your stand and pushing it back up, you may want to loosen up that bolt just a little bit. Or if you don't have a strap to secure it, you could just tighten it down as tight as you can get it to make sure it doesn't fall down while you're traveling.Now a great use of this cargo carrier is going to be that it can tilt down to make it easier to load up any heavier bulky objects. Whether it's on the wheels or even just on that circle shank that we saw earlier connected to our truck. Now for you hunters out there, this is going to be a big advantage for you because when you're out in the woods and you've killed your deer or whatever you might be hunting, it gets tough to be able to carry that all the way back to your truck or to wherever you're saying.So, obviously we don't have a deer right here, but we just want to kind of show you how it would work, dragging up your object onto the cart. With the wheels being in the center of the cart, it makes it very easy to tilt it to one side or the other and make sure that all the weight from our cargo is sitting on top of the wheels. So we just have it tilted down right here with the handle on top. And then you just grab a hold of whatever you're loading, pull it up, and then if you can't get it past a certain point, we can just hold it and then tilt the carrier up all the way. We could even just set it down over here. Bring it, set it in place. And now with those wheels

Review of the Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier,Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier Review,Hunting and Fishing,300 lbs,Field Dressing Tools,Game Cart,Viking Solutions,Viking Solutions Tilt-N-Go II Cart - Hitch Mounted - 300 lbs,trailers,trailer hitches,vehicles,towing,RV,RV supplies,heavy-duty towing supplies,trailer parts,bike racks,